Whirlpool Cabrio Washer Control Board W10189966

W10189966, AP4360738, W10112113, W10155109, W10188476, W10201186, W10121508, W10051176, W10130544, 8576385, W10112112, W10104830, W10051171, 8576386, W10104820, W10121311

Replacing this will fix the following problems:

• F1 Error
• Machine Wont Power
• Bad / Burned Board

Common Problems Include:

• F1 Error / F1 Code F-1
• F50 Code F-50
• Very Common Board
• High Defect Rate

Solutions:

Replaces with Brand New Control Board W10189966

• Brand New Board
• 90 Day Warranty

 

use coupon code "nlapartsblog" for 5 percent savings!

Installation Instructions: 

1. First unplug the washer / cut the circuit breaker
2. Next, remove the three hex screws from the rear of the top console - keep them separated not to get them mixed up with other screws.
3. Lift the console off the cabinet and disconnect the cable going to the user interface board.  This will give you access to the motor/machine control board.
4. Disconnect the nine wire connectors going to the control board and the pressure switch hose (also called a pressure transducer tube).
5. Remove the mounting screw and lift the front of the control, slide it out from under the clips at the back, and remove it.
6. Re-install the new control board in the reverse order.

Fits the following model numbers:

MTW6300TQ0, MTW6400TQ0, MTW6500TQ0, MTW6600TB0, MTW6600TQ0, WTW6200SW2, WTW6300SB2, WTW6300SG2, WTW6300SW2, WTW6400SW2, WTW6600SB2, WTW6600SG2, WTW6600SW2, WTW6200SW3, WTW6400SW3, WTW6600SB3, WTW6600SG3, WTW6600SW3, WTW6200SW1, WTW6300SB1, WTW6300SG1, WTW6300SW1, WTW6400SW1, WTW6600SB1, WTW6600SG1, WTW6600SW1, WTW6200SW0, WTW6300SB0, WTW6300SG0, WTW6300SW0, WTW6400SW0, WTW6600SB0, WTW6600SG0, WTW6600SW0, WTW6700TW0.